|
|
|
National Stock Number:
5340-01-024-8517
Federal Supply Class:
5340
National Item Identification Number:
010248517
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 204-43057-3 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.800 INCHES NOMINAL | | FABRICATION METHOD | STAMPED | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG WIDTH | 0.800 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SPECIAL FEATURES | W/2 SILICONE RUBBER PADS 0.062 IN. THK X 0.800 IN. SQ | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SRF-2.30 FSCM 81205 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER |
|
|