|
|
|
National Stock Number:
5340-01-024-3414
Federal Supply Class:
5340
National Item Identification Number:
010243414
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 110393 | 19564 | CRSI INC DELAWARE DIV GENERAL DYNAMICS SATCOM TECHNOLOGIES INC. |
|
Techincal Specification:
| CENTER SECTION WIDTH | 2.000 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.620 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.030 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG END WIDTH | 0.380 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG LENGTH | 0.590 INCHES NOMINAL | | FIRST LEG WIDTH | 0.880 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE AND TAPERED | | FIRST LEG THICKNESS | 0.030 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | MOUNTING HOLE TYPE | PLAIN | | SPECIAL FEATURES | 1 SELF CLINCHING STUD IN EACH HOLE IN SECOND LEG | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.380 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.030 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.137 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | SECOND LEG LENGTH | 1.000 INCHES NOMINAL | | SECOND LEG WIDTH | 2.000 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|