|
|
|
National Stock Number:
5340-01-019-2981
Federal Supply Class:
5340
National Item Identification Number:
010192981
Description:
CLIP,SPRING TENSION
Detail:
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
|
Manufacturer Information:
| 16412246 | D2416 | THALES DEFENCE & SECURITY SYSTEMSGMBH | | 16412246 | F0053 | THALES COMMUNICATIONS | | 6023-2A | 91506 | AUGAT INC | | M24066/2-146 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M24066/2-146 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-24066/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM24066/2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| DISTANCE FROM LOOP CENTER TO END | 0.720 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | DEPARTURE FROM CITED DOCUMENT | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | HOLE DIAMETER | 0.159 INCHES MINIMUM AND 0.165 INCHES MAXIMUM | | LENGTH | 1.290 INCHES MINIMUM AND 1.330 INCHES MAXIMUM | | LOOP/HOLDING DIMENSION | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | OVERALL HEIGHT | 1.330 INCHES MINIMUM AND 1.370 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A682 ASSN STD ALL MATERIAL RESPONSES OR ASTM A684 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL THICKNESS | 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MOUNTING METHOD | UNTHREADED HOLE | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | WIDTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|