FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
FIRST LEG HOLE DIAMETER | 0.1865 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
FIRST LEG LENGTH | 0.650 INCHES NOMINAL |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.573 INCHES NOMINAL |
FIRST LEG WIDTH | 1.260 INCHES NOMINAL |
FIRST LEG STYLE | SQUARE |
FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T4 FED SPEC SINGLE MATERIAL RESPONSE |
MATERIAL | ALUMINUM ALLOY 6061 |
SPECIAL FEATURES | A 1.180 IN. W BY 0.820 IN. DEEP WITH 0.440 IN. INSIDE CORNER RADII CUTOUT LOCATED IN SECOND LEG,NUT,SELF-LOCKING IS ATTACHED TO UNDERSIDE OF HOLE IN FIRST LEG |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.572 INCHES NOMINAL |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.000 INCHES NOMINAL |
SECOND LEG LENGTH | 6.940 INCHES NOMINAL |
SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
SECOND LEG HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
SECOND LEG STYLE | SQUARE |
SECOND LEG THICKNESS | 0.050 INCHES NOMINAL |
SECOND LEG WIDTH | 1.260 INCHES NOMINAL |
STYLE DESIGNATOR | ANGLE |
SURFACE TREATMENT | OXIDE FILM |