|
|
|
National Stock Number:
5340-01-014-2459
Federal Supply Class:
5340
National Item Identification Number:
010142459
Description:
CLIP,SPRING TENSION
Detail:
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
|
Manufacturer Information:
| 6019-90AAR4 | 91506 | AUGAT INC | | M24066/2-233 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | M24066/2-233 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-24066/2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS17160-33 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM24066/2 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| DISTANCE FROM LOOP CENTER TO END | 0.547 INCHES NOMINAL | | HOLE DIAMETER | 0.128 INCHES NOMINAL | | LENGTH | 0.910 INCHES MINIMUM AND 0.950 INCHES MAXIMUM | | LOOP/HOLDING DIMENSION | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | OVERALL HEIGHT | 1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL THICKNESS | 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL | | MOUNTING METHOD | UNTHREADED HOLE | | WIDTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
|
|