| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.040 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.640 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.198 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.036 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,1/4 H MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 301 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.390 INCHES MINIMUM AND 0.397 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.560 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.700 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.036 INCHES NOMINAL |
| STYLE DESIGNATOR | OFFSET ANGLE |