|
|
|
National Stock Number:
5340-01-010-3712
Federal Supply Class:
5340
National Item Identification Number:
010103712
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 627-8095-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| CENTER SECTION WIDTH | 1.250 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.250 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL | | FABRICATION METHOD | STAMPED | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.386 INCHES MINIMUM AND 0.389 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.370 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.190 INCHES NOMINAL | | FIRST LEG WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG LENGTH | 1.120 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL | ALUMINUM ALLOY 5052 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.750 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.190 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES | | SECOND LEG HOLE DIAMETER | 0.128 INCHES NOMINAL | | SECOND LEG LENGTH | 1.250 INCHES NOMINAL | | SECOND LEG WIDTH | 1.250 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|