|
|
|
National Stock Number:
5340-01-003-7386
Federal Supply Class:
5340
National Item Identification Number:
010037386
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 68A450678-2003 | 13002 | GOODRICH CORPORATION | | 68A450678-2003 | 6K4C8 | GOODRICH CORPORATION | | 68A450678-2003 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.160 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.500 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.160 INCHES NOMINAL | | FIRST LEG WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG OFFSET ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG STYLE | END RADIUS | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729,COND N MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.310 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | SECOND LEG OFFSET ANGLE | 30.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG THICKNESS | 0.160 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.953 INCHES MINIMUM AND 1.007 INCHES MAXIMUM | | SECOND LEG WIDTH | 0.620 INCHES NOMINAL | | STYLE DESIGNATOR | OFFSET DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS13101,T2,CLASS 1,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|