| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.060 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| HEAT TREATMENT | T-3 SOLUTION HEAT TREATED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG END RADIUS | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.890 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |