| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.172 INCHES NOMINAL |
| FIRST LEG ANGLE | 126.5 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.218 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.030 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.375 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.122 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.123 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| SECOND LEG OFFSET ANGLE | 30.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.547 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.030 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.375 INCHES NOMINAL |
| STYLE DESIGNATOR | OFFSET ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS C FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |