| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.098 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.072 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.938 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250.5,T851 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.625 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.219 INCHES MINIMUM AND 0.233 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.072 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.750 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | ANODIZE |