| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| HEAT TREATMENT | ANNEALED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 302 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END RADIUS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.118 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PASSIVATE |