|
|
|
National Stock Number:
5340-00-805-0531
Federal Supply Class:
5340
National Item Identification Number:
008050531
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 372-1732-000 | 95105 | ROCKWELL COLLINS, INC. | | MREV | 81312 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.375 INCHES NOMINAL | | CENTER SECTION HEIGHT | 0.188 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.031 INCHES NOMINAL | | FABRICATION METHOD (NON-CORE) | STAMPED | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.109 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.094 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.109 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.120 INCHES NOMINAL | | FIRST LEG WIDTH | 0.375 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS AND TAPERED | | FIRST LEG THICKNESS | 0.031 INCHES NOMINAL | | MATERIAL | COPPER ALLOY | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG LENGTH | 0.296 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.031 INCHES NOMINAL | | SECOND LEG WIDTH | 0.180 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | CADMIUM |
|
|