| CENTER SECTION HEIGHT | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| FABRICATION METHOD | MACHINED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.845 INCHES MINIMUM AND 0.895 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.212 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG END RADIUS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |