| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.810 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.070 INCHES NOMINAL |
| FIRST LEG END WIDTH | 2.080 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.600 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.090 INCHES NOMINAL |
| HEAT TREATMENT | ANNEALED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4130 |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG END WIDTH | 0.800 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.510 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.300 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.090 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.260 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.600 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM AND CHROMATE |