| FEATURES PROVIDED | NUT |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.1924 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.220 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.650 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.216 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.309 INCHES MINIMUM |
| FIRST LEG WIDTH | 2.132 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5512 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.3120 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.320 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.320 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.308 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.770 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.039 INCHES MINIMUM |
| SECOND LEG WIDTH | 2.452 INCHES NOMINAL |
| SPECIAL FEATURES | SECOND LEG INCL NUT PLATE MS21048-4 RIVETED OVER SECOND HOLE W/AN125422 TWO PLACES; USED ON TF41 ENGINE |
| STYLE DESIGNATOR | ANGLE |