| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.093 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.312 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.129 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.392 INCHES NOMINAL |
| SECOND LEG SLOT LENGTH | 0.276 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.170 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG LENGTH | 0.415 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SD1020,TY 1,CL B,FSCM 35351 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | TIN AND ZINC |