| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| HEAT TREATMENT | ANNEALED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 302 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.590 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND LEG END RADIUS | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PASSIVATE |