| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.310 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG LENGTH | 0.650 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.419 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.850 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.720 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.720 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.2006 INCHES MINIMUM AND 0.2066 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.100 INCHES NOMINAL |
| HEAT TREATMENT | ANNEALED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 416 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.310 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.550 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.520 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.100 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG THICKNESS | 0.100 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 0.199 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.350 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.720 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | CADMIUM |