|
|
|
National Stock Number:
5340-00-664-6974
Federal Supply Class:
5340
National Item Identification Number:
006646974
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-226 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | ANSI/BHMA A156.1 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | FF-H-116 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BODY WIDTH | 2.000 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL MORTISE | | KNUCKLE TYPE | FRICTION | | KNUCKLE QUANTITY | 5 | | MATERIAL THICKNESS | 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY PIN | | MATERIAL | STEEL CORROSION RESISTING BODY | | MOUNTING HOLE QUANTITY | 6 | | SPECIAL FEATURES | ALL HARDWARE REQUIRED FOR ATTACHMENT SHALL BE INCLUDED; HINGE MOUNTING TYPE IS FULL MORTISE OR TRANSOM; STANDARD WEIGHT, WITH PLAIN BEARING | | PERFORMANCE TYPE | NOT RATED | | PIN CENTER TO BODY EDGE DISTANCE | 1.000 INCHES NOMINAL | | PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT | ZINC PIN |
|
|