|
|
|
National Stock Number:
5340-00-659-2844
Federal Supply Class:
5340
National Item Identification Number:
006592844
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 3-98132-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.800 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG END RADIUS | 0.400 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL | | FIRST LEG WIDTH | 0.800 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | HEAT TREATMENT | COLD WORKED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.400 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.400 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.400 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM | | SECOND LEG WIDTH | 0.800 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|