|
|
|
National Stock Number:
5340-00-658-4976
Federal Supply Class:
5340
National Item Identification Number:
006584976
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 52694 | 82423 | KLEINSCHMIDT INC | | SM-B-157314 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.750 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CORNER RADIUS | 0.062 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG LENGTH | 0.406 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 0.438 INCHES NOMINAL | | FIRST LEG STYLE | CORNER RADIUS | | MATERIAL | IRON | | MOUNTING HOLE TYPE | PLAIN AND THREADED | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.375 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.164 INCHES NOMINAL | | SECOND LEG LENGTH | 0.891 INCHES NOMINAL | | SECOND LEG WIDTH | 1.375 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TYPE M CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PHOSPHATE MANGANESE |
|
|