|
|
|
National Stock Number:
5340-00-657-9595
Federal Supply Class:
5340
National Item Identification Number:
006579595
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 364066-1 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.620 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.800 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL | | FABRICATION METHOD | STAMPED | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG END RADIUS | 0.310 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL | | FIRST LEG WIDTH | 0.620 INCHES NOMINAL | | FIRST LEG LENGTH | 0.810 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729,COND N MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.310 INCHES NOMINAL | | SECOND LEG ANGLE | 140.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.203 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.860 INCHES NOMINAL | | SECOND LEG WIDTH | 0.620 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT | CADMIUM |
|
|