| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.518 INCHES MINIMUM AND 0.522 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.405 INCHES MINIMUM AND 0.415 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.770 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1020 |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.069 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.108 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.810 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.770 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |