| CENTER SECTION HEIGHT | 4.500 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 2.500 INCHES NOMINAL |
| CENTER SECTION WIDTH | 8.690 INCHES NOMINAL |
| FABRICATION METHOD | STAMPED |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.370 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 3.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG HOLE DIAMETER | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG WIDTH | 8.690 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,0 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | THREADED |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.500 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.120 INCHES NOMINAL |
| SECOND LEG ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.440 INCHES NOMINAL |
| SECOND LEG END WIDTH | 6.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG LENGTH | 7.125 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| STYLE DESIGNATOR | DOUBLE ANGLE |