|
|
|
National Stock Number:
5340-00-152-2473
Federal Supply Class:
5340
National Item Identification Number:
001522473
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 691081 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 691081 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.059 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.500 INCHES NOMINAL | | FABRICATION METHOD | STAMPED | | FIRST LEG ANGLE | 170.0 DEGREES NOMINAL | | FIRST LEG END RADIUS | 0.375 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.219 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG LENGTH | 0.850 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.059 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 410 | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.375 INCHES NOMINAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.219 INCHES NOMINAL | | SECOND LEG WIDTH | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|