| CENTER SECTION HEIGHT | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| FABRICATION METHOD | STAMPED |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| FIRST LEG ANGLE | 125.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| FIRST LEG END RADIUS | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.202 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 321 |
| SECOND LEG ANGLE | 125.0 DEGREES NOMINAL |
| SECOND LEG END RADIUS | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.380 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT | PASSIVATE |