| FIRST LEG ANGLE | 105.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG LENGTH | 1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.390 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.255 INCHES MINIMUM AND 0.258 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| FIRST LEG SLOT LENGTH | 0.390 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| SECOND LEG STYLE | END RADIUS AND TAPERED |
| SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 299-099-031 BELL HELICOPTER CO. MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE ZINC |