|
|
National Stock Number: 5331-01-065-5954
Federal Supply Class: 5331
National Item Identification Number: 010655954
Description: O-RING
Detail: A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION.
|
Manufacturer Information:
2-439 N674-70 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | 2-439N674-70 | 02697 | PARKER-HANNIFIN CORP | 332 ITEM 2 | 53918 | SEPARATION & RECOVERY SYSTEMS INC | 5331PL1247877 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | AS568-439/MIL-G-21569 CL 1 | 0U583 | SAE INTERNATIONAL | AS568-439/MIL-G-21569 CL 1 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | AS568-439MIL-G- 21569 CL.1 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | AS568-439MIL-G- 21569 CLASS 1 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | OR51 | 53918 | SEPARATION & RECOVERY SYSTEMS INC |
|
Techincal Specification:
ELONGATION PERCENTAGE | 250 MAXIMUM | CENTER HOLE DIAMETER | 6.452 INCHES MINIMUM AND 6.498 INCHES MAXIMUM | CRITICALITY CODE JUSTIFICATION | ZZZY | CROSS-SECTIONAL HEIGHT | 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM | HARDNESS RATING | 65.0 SHORE DUROMETER A NOMINAL | OUTSIDE DIAMETER | 7.025 INCHES NOMINAL | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTERS SPECIAL QUALITY CONTROL PROVISIONS | TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|