|
|
|
National Stock Number:
5331-00-684-5098
Federal Supply Class:
5331
National Item Identification Number:
006845098
Description:
O-RING
Detail:
A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION.
|
Manufacturer Information:
| 10375808 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 352231008340 | H0203 | THALES NEDERLAND B.V. | | 5-157 | 83259 | PARKER-HANNIFIN CORPORATION | | 5-157 S899-50 | 02697 | PARKER-HANNIFIN CORP | | 5-157 S899-50 | C0308 | PARKER HANNIFIN GMBH O-RING DIVISION | | 5-157-77-545 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS | | 5331PL0841416 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 590-800-005 | A1997 | ELETTRONICA SPA | | 590-800-005 | C3141 | ELETTRONICA GMBH | | 5M.3882.220.10 | D1901 | HENSOLDT SENSORS GMBH | | A-A-55549 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55549-13 | 2K255 | GOLDINGER, BERNARD | | AA55549-13 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55549-13 | 59789 | PROPONENT, INC. | | AA55549-13 | 77308 | PARCO, LLC | | EC0SV13 | 04552 | NATIONAL STARCH AND CHEMICAL CO EMERSON AND CUMING SPECIALTY POLYMERS DIV | | EC0SV13 | 057P8 | MARYED INTERNATIONAL INC DBA BUZZOFF OUTDOOR WEAR | | MS90064-13 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS90064-5 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NE240A5 | H0203 | THALES NEDERLAND B.V. | | S0899 5-157 | 02697 | PARKER-HANNIFIN CORP |
|
Techincal Specification:
| CENTER HOLE DIAMETER | 1.333 INCHES MINIMUM AND 1.343 INCHES MAXIMUM | | CROSS-SECTIONAL HEIGHT | 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | HARDNESS RATING | 50.0 SHORE DUROMETER A NOMINAL | | OUTSIDE DIAMETER | 1.504 INCHES MINIMUM AND 1.540 INCHES MAXIMUM | | MATERIAL | RUBBER SILICONE CLASS Q | | TEMP RATING | -103.0 FAHRENHEIT AND 400.0 FAHRENHEIT |
|
|