|
|
|
National Stock Number:
5330-01-542-6675
Federal Supply Class:
5330
National Item Identification Number:
015426675
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 5128359 | 1Z496 | AP LABS, INC. | | 5128359-1 | 0AYU9 | KONTRON AMERICA, INCORPORATED | | 5128359-1 | 1Z496 | AP LABS, INC. |
|
Techincal Specification:
| APERTURE LENGTH | 14.510 INCHES NOMINAL | | APERTURE WIDTH | 4.520 INCHES NOMINAL | | BOLT HOLE QUANTITY | 42 | | CROSS-SECTIONAL SHAPE STYLE | METAL AND SYNTHETIC RUBBER | | CROSS-SECTIONAL THICKNESS | 0.062 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.225 INCHES NOMINAL | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH | 0.450 INCHES NOMINAL | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH | 0.450 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.225 INCHES NOMINAL | | OVERALL LENGTH | 15.410 INCHES NOMINAL | | OVERALL WIDTH | 5.420 INCHES NOMINAL | | MATERIAL | ALUMINUM INTERNALLY MOLDED-IN REINFORCEMENT | | MATERIAL | SILICONE OVERALL | | SPECIAL FEATURES | THE DISTANCE BETWEEN 1ST AND 2ND OF LARGER HOLES FROM EITHER END ALONG LENGTH IS 3.500 IN (NOM); DISTANCE BETWEEN 2ND AND 3RD OF LARGER HOLES FROM EITHER END ALONG LENGTH IS 3.250 IN (NOM); THE DISTANCE BETWEEN LARGER AND SMALLER HOLES IS 0.300 IN (NOM); THERE ARE 14 0.188 IN DIA HOLES AND 28 0.125 IN DIA HOLES; DIA OF ALUM INTERNALLY MOLDED-IN REINFORCEMENT WIRE IS 0.0045 IN | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|