|
|
|
National Stock Number:
5330-01-267-1130
Federal Supply Class:
5330
National Item Identification Number:
012671130
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 6096D83-H03 | 04804 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | LL-HX5-1167 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA |
|
Techincal Specification:
| APERTURE WIDTH | 0.440 INCHES NOMINAL | | APERTURE LENGTH | 0.800 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CRITICALITY CODE JUSTIFICATION | ZZZY | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.031 INCHES NOMINAL | | HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.130 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.260 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.310 INCHES NOMINAL | | OVERALL LENGTH | 1.500 INCHES NOMINAL | | OVERALL WIDTH | 0.620 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6130,TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | RUBBER CHLOROPRENE CLASS CR OVERALL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | SPECIAL FEATURES | ONE LENGTH OF THE APERTUE ANGLED IN 10 DEGREES PLUS OR MINUS 2 DEGREES | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | STYLE DESIGNATOR | NON-CIRCULAR | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|