|
|
|
National Stock Number:
5330-01-062-9794
Federal Supply Class:
5330
National Item Identification Number:
010629794
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 0N503083-1 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| APERTURE DIAMETER | 0.375 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.000 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.062 INCHES NOMINAL | | CROSS-SECTIONAL HEIGHT | 0.062 INCHES NOMINAL | | HARDNESS RATING | 63.0 SHORE DUROMETER A MAXIMUM OVERALL | | HOLE DIAMETER | 0.159 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.006 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.300 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.300 INCHES NOMINAL | | OVERALL LENGTH | 1.300 INCHES NOMINAL | | OVERALL WIDTH | 1.300 INCHES NOMINAL | | MATERIAL | RUBBER SILICONE CLASS Q OVERALL | | STYLE DESIGNATOR | NON-CIRCULAR | | TEMP RATING | -55.0 CELSIUS AND 125.0 CELSIUS | | TEST DATA DOCUMENT | 98230-0N503083-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|