| BOLT HOLE QUANTITY | 6 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.555 INCHES MINIMUM AND 2.615 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.095 INCHES MINIMUM AND 3.155 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | ZZZY |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| CROSS-SECTIONAL THICKNESS | 0.062 INCHES NOMINAL |
| HARDNESS RATING | 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL |
| HOLE DIAMETER | 0.200 INCHES NOMINAL |
| OUTSIDE CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| OVERALL LENGTH | 5.640 INCHES MINIMUM AND 5.700 INCHES MAXIMUM |
| OVERALL WIDTH | 3.590 INCHES MINIMUM AND 3.650 INCHES MAXIMUM |
| MATERIAL | RUBBER SILICONE CLASS Q OVERALL |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STYLE DESIGNATOR | NON-CIRCULAR |
| TEMP RATING | -80.0 FAHRENHEIT AND 425.0 FAHRENHEIT |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |