5330-00-839-1273, GASKET

5306-00-839-1274 BOLT,INTERNAL WRENCHING

National Stock Number:
5330-00-839-1273

Federal Supply Class:
5330

National Item Identification Number:
008391273

Description:
GASKET

Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Manufacturer Information:

1775849	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
19302REV1	33654	HOWDEN FLUID SYSTEMS
19302REV1	58163	MEGGITT (NORTH HOLLYWOOD), INC.
19302REV1	97933	NATIONAL STEEL CORP NATIONAL STEEL SERVICE CENTER INC

Techincal Specification:

APERTURE WIDTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
APERTURE LENGTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	2.000 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.624 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE	SOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
HARDNESS RATING	45.0 SHORE DUROMETER A MINIMUM AND 53.0 SHORE DUROMETER A MAXIMUM OVERALL
HOLE DIAMETER	0.152 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
INSIDE CORNER RADIUS	0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
OUTSIDE CORNER RADIUS	0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
OVERALL LENGTH	2.350 INCHES MINIMUM AND 2.370 INCHES MAXIMUM
OVERALL WIDTH	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-900 TY 1 CL1 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-G-1149 TY 1 CL 2 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL	RUBBER BUTADIENE-STYRENE CLASS SBR AND RUBBER CHLOROPRENE CLASS CR OVERALL
MAXIMUM PRESSURE RATING	95.0 POUNDS PER SQUARE INCH
STYLE DESIGNATOR	NON-CIRCULAR

Click here to Register for Free 30-day Trial