|
|
|
National Stock Number:
5330-00-768-8714
Federal Supply Class:
5330
National Item Identification Number:
007688714
Description:
SEAL,NONMETALLIC STRIP
Detail:
An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items having a square or rectangular cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to a specific shape, except round, with or without joints. It may have fabric, cord or metal reinforcement. Except for molded corners, end cuts, and mounting facilities such as holes, slots, press-fit buttons, or the like, the item must be of one continuous cross section. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER STRIP. For items with round cross sections see SEAL, NONMETALLIC ROUND SECTION. Excludes GASKET and PACKING, PREFORMED.
|
Manufacturer Information:
| 5330007688714 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7688714 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| ANGLE HEIGHT | 0.083 INCHES MINIMUM AND 0.103 INCHES MAXIMUM | | APERTURE LENGTH | 6.114 INCHES MINIMUM AND 6.154 INCHES MAXIMUM | | APERTURE WIDTH | 2.004 INCHES MINIMUM AND 2.028 INCHES MAXIMUM | | CONSTRUCTION | SOLID | | CROSS-SECTIONAL SHAPE STYLE | W OR W/O RADIUS DELTA | | CROSS-SECTIONAL HEIGHT | 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | CROSS-SECTIONAL WIDTH | 0.179 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | FABRICATION METHOD | SOLID | | INSIDE CORNER RADIUS | 0.015 INCHES MINIMUM AND 0.047 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.125 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D2000 5BG615ABE4F2 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL | | SMOOTH FINISH SURFACE LOCATION | SIDE | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|