|
|
|
National Stock Number:
5330-00-673-8293
Federal Supply Class:
5330
National Item Identification Number:
006738293
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 110757 | 83259 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.406 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.906 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.906 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | METAL AND SYNTHETIC RUBBER | | CROSS-SECTIONAL THICKNESS | 0.080 INCHES NOMINAL | | GAGE RING THICKNESS | 0.120 INCHES NOMINAL | | HARDNESS RATING | 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL | | HOLE DIAMETER | 0.312 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.281 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.282 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.282 INCHES NOMINAL | | OVERALL LENGTH | 2.375 INCHES NOMINAL | | OVERALL WIDTH | 2.375 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC 1ST MATERIAL RESPONSE AND MIL-R-6855,CL 1,GR 60 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL | | SPECIAL FEATURES | FOUR HOLES 0.188 IN. DIA USED FOR POSITIONING LOCATED ON CENTERLINE ONE EACH SIDE OF GASKET | | STYLE DESIGNATOR | NON-CIRCULAR |
|
|