|
|
|
National Stock Number:
5330-00-139-7444
Federal Supply Class:
5330
National Item Identification Number:
001397444
Description:
GASKET
Detail:
A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.
|
Manufacturer Information:
| 61S-0539M-001 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 61S0539M0010 | 65984 | DANAHER CORPORATION DBA MCCROMETER DIVISION | | 61S539M | 53553 | AMETEK INC SCHUTTE AND KOERTING DIV | | 62G008MPC14 | 53553 | AMETEK INC SCHUTTE AND KOERTING DIV | | 75G-0060M PIECE 14 | 53553 | AMETEK INC SCHUTTE AND KOERTING DIV |
|
Techincal Specification:
| APERTURE LENGTH | 6.156 INCHES MINIMUM AND 6.188 INCHES MAXIMUM | | APERTURE WIDTH | 2.594 INCHES MINIMUM AND 2.625 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CRITICALITY CODE JUSTIFICATION | ZZZY | | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION | | CROSS-SECTIONAL THICKNESS | 0.312 INCHES NOMINAL | | HARDNESS RATING | 20.0 SHORE DUROMETER A NOMINAL OVERALL | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.312 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.062 INCHES NOMINAL | | OVERALL LENGTH | 7.188 INCHES NOMINAL | | OVERALL WIDTH | 2.875 INCHES NOMINAL | | MATERIAL | RUBBER SYNTHETIC OVERALL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | STYLE DESIGNATOR | NON-CIRCULAR | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|