| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| FASTENER LENGTH | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| GRIP LENGTH | 0.120 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| HEAD HEIGHT | 0.449 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.2986 INCHES MINIMUM AND 0.3018 INCHES MAXIMUM |
| HEAD STYLE | CROWN COUNTERSUNK LESS THAN 135 DEGREES |
| LUBRICATION | CETYL ALCOHOL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | 100 DEG F FLUSH CROWN SHEAR HEAD ALLOY STEEL 1/16" GRIP VARIATION |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6000,MIL-S-6626 OR MIL-S-8048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD SIZE | 0.1900 INCHES |
| SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1995 INCHES MAXIMUM |
| SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
| SPECIAL FEATURES | CETYL ALCOHOL PER HI-SHEAR SPEC 306 |
| SPECIFICATION/STANDARD DATA | 73197-PRODUCT SPECIFICATION 352 MANUFACTURERS SPECIFICATION |
| WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 32 |
| TIP DIAMETER | 0.1830 INCHES MINIMUM AND 0.1840 INCHES MAXIMUM |