| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 0.735 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| GRIP LENGTH | 0.100 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.367 INCHES MINIMUM AND 0.383 INCHES MAXIMUM |
| LUBRICATION | DRY FILM OR CETYL ALCOHOL OR WAX |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE STEM OR AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE STEM OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047 STA MIL SPEC SINGLE MATERIAL RESPONSE NUT OR AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE NUT OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | IRON ALLOY 660 STEM |
| MATERIAL | STEEL COMP 304 SLEEVE |
| MATERIAL | TITANIUM ALLOY UNS R56400 NUT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MINIMUM TENSILE STRENGTH | 1400 POUNDS PER SQUARE INCH |
| SHANK DIAMETER | 0.1625 INCHES MINIMUM AND 0.1645 INCHES MAXIMUM |
| SHEAR STRENGTH | 4600 DOUBLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | ITEM ALSO HAS AN INSERT, MATERIAL IS ACETAL PER L-P-392A AND A NUT DRIVE, MATERIAL IS MILD STEEL PER ASTM A 108, COLOR BROWN. NUT FINISH IS PHOSPHATE FLOURIDE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, KAL GARD CONVERSION COATING ANN-RO NO. 1013 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, KAL GARD CONVERSION COATING ANN-RO NO. 1013 OPTIONAL FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT | PASSIVATE SLEEVE |
| SURFACE TREATMENT | PASSIVATE STEM |