| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | BREAK STEM |
| FASTENER LENGTH | 0.992 INCHES NOMINAL |
| GRIP LENGTH | 0.564 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| HARDNESS RATING | 43.5 ROCKWELL C MINIMUM AND 46.5 ROCKWELL C MAXIMUM NUT |
| HARDNESS RATING | 43.5 ROCKWELL C MINIMUM AND 46.5 ROCKWELL C MAXIMUM BOLT |
| HEAD MAJOR DIAMETER | 0.306 INCHES NOMINAL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| LUBRICATION | CETYL ALCOHOL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5639 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE BOLT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE NUT |
| MATERIAL | STEEL COMP 304 SLEEVE |
| MATERIAL | STEEL COMP 8740 BOLT |
| MATERIAL | STEEL COMP 8740 NUT |
| NOMINAL THREAD SIZE | 0.188 INCHES |
| SHANK STYLE | PIN-RIVET, TAPERED, THREADED |
| SPECIAL FEATURES | FASTENER LENGTH GIVEN IS INSTALLED DIMENSION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS5672 NATIONAL SPEC 1ST TREATMENT RESPONSE BOLT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS5672 NATIONAL SPEC 2ND TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 3 FED SPEC 3RD TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT | CADMIUM BOLT |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SLEEVE |
| THREAD CLASS | LH |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNS |
| THREAD QUANTITY PER INCH | 40 |
| TIP DIAMETER | 0.211 INCHES NOMINAL |