5320-01-166-7973 RIVET,BLIND Index 5320-01-166-7975 PIN-RIVET

National Stock Number:
5320-01-166-7974

Federal Supply Class:
5320

National Item Identification Number:
011667974

Description:
PIN-RIVET

Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.


Manufacturer Information:
7693-67104-04814170HUGHES MISSILE SYSTEMS CO SAN DIEGO
BACB30JC10-1181205THE BOEING COMPANY
HL1051PB-10-1106725SPS TECHNOLOGIES, LLC
HL1051PB-10-1106950HOWMET GLOBAL FASTENING SYSTEMS INC
HL1051PB-10-1117446HUCK INTERNATIONAL, INC
HL1051PB-10-111RC86HOWMET GLOBAL FASTENING SYSTEMS INC
HL1051PB-10-1156878SPS TECHNOLOGIES, LLC
HL1051PB-10-1160516WEST COAST AEROSPACE, INC.
HL1051PB-10-1173197HI-SHEAR CORPORATION
HL1051PB-10-1192215HOWMET GLOBAL FASTENING SYSTEMS INC
HL1051PB-10-11L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
HL21PB-10-1106725SPS TECHNOLOGIES, LLC
HL21PB-10-1117446HUCK INTERNATIONAL, INC
HL21PB-10-1156878SPS TECHNOLOGIES, LLC
HL21PB-10-1160516WEST COAST AEROSPACE, INC.
HL21PB-10-1173197HI-SHEAR CORPORATION
HL21PB-10-1192215HOWMET GLOBAL FASTENING SYSTEMS INC
HL21PB-10-1197928HUCK INTL INC
HL21PB-10-11L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC


Techincal Specification:
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
FASTENER LENGTH1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
GRIP LENGTH0.693 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.6335 INCHES MAXIMUM
HEAD STYLEFLUSH COUNTERSUNK
LUBRICATIONCETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD SIZE0.312 INCHES
SHANK DIAMETER0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
SHANK STYLEPIN-RIVET, STRAIGHT, THREADED
WIDTH BETWEEN FLATS0.1270 INCHES MINIMUM AND 0.1295 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial