| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | THREADED SLEEVE |
| FASTENER LENGTH | 1.267 INCHES NOMINAL |
| GRIP LENGTH | 0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.378 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5667 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD 3RD MATERIAL RESPONSE CAP |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD 1ST MATERIAL RESPONSE NUT |
| MATERIAL | NICKEL ALLOY X-750 SLEEVE |
| MATERIAL | STEEL COMP H11 CAP |
| MATERIAL | STEEL COMP H11 NUT |
| MINIMUM TENSILE STRENGTH | 2100 POUNDS PER SQUARE INCH |
| SHANK DIAMETER | 0.228 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| SHANK STYLE | BLIND RIVET, NUT AND BOLT (ASSEMBLY) |
| SHEAR STRENGTH | 6900 DOUBLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | USED ON METEROLOGICAL EQUIP 443L WEATHER OBSERVATION & FORCASTING SYS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 FED STD SINGLE TREATMENT RESPONSE CAP |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 FED STD SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE I,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT | CADMIUM CAP |
| SURFACE TREATMENT | CADMIUM NUT |
| SURFACE TREATMENT | CADMIUM SLEEVE |