| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| EXPANSION DEVICE | THREADED STEM |
| FASTENER LENGTH | 0.978 INCHES NOMINAL |
| GRIP LENGTH | 0.271 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.077 INCHES NOMINAL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.342 INCHES MINIMUM |
| LUBRICATION | GREASE FILM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 BODY |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 STEM |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 303F SLEEVE |
| MINIMUM TENSILE STRENGTH | 1400 POUNDS PER SQUARE INCH |
| SHANK DIAMETER | 0.202 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| SHEAR STRENGTH | 5240 DOUBLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT | CADMIUM BODY |
| SURFACE TREATMENT | CADMIUM STEM |
| SURFACE TREATMENT | CADMIUM SLEEVE |