COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
EXPANSION DEVICE | THREADED STEM |
GRIP LENGTH | 0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM NUT |
HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM BOLT |
HEAD MAJOR DIAMETER | 0.222 INCHES MINIMUM AND 0.247 INCHES MAXIMUM |
HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT |
MATERIAL | STEEL COMP 303 OR STEEL COMP 304 SLEEVE |
MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT |
MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT |
SHANK DIAMETER | 0.1625 INCHES MINIMUM AND 0.1645 INCHES MAXIMUM |
SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
SHEAR STRENGTH | 3355 DOUBLE POUNDS PER SQUARE INCH |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
SURFACE TREATMENT | CADMIUM AND CHROMATE BOLT |
SURFACE TREATMENT | CADMIUM AND CHROMATE NUT |
SURFACE TREATMENT | PASSIVATE AND CADMIUM SLEEVE |