5320-00-768-7139, RIVET,BLIND

National Stock Number:
5320-00-768-7139

Federal Supply Class:
5320

National Item Identification Number:
007687139

Description:
RIVET,BLIND

Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.

Manufacturer Information:

1015	5RQL2	DRS ENVIRONMENTAL SYSTEMS INC
1015	98255	DRS SUSTAINMENT SYSTEMS INC
38-106-05-13	94222	SOUTHCO INC
8186031	24617	GENERAL MOTORS CORP
8186031	72915	GENERAL MOTORS CORP ELECTRO-MOTIVE DIV
CDR-4341-MS-6-04	05693	CHERRY TEXTRON INC CHERRY COMMERCIAL FASTENERS PRODUCTS DIV OF TEXTRON INC
CDR-4341-MS-6-04	11815	SPS TECHNOLOGIES, LLC
M38-106-05-13	91340	MET-PRO CORPORATION
MS24662-151	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS24662-151	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS24662-69	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV320-6-4	53551	ALLFAST FASTENING SYSTEMS, LLC
RV320-6-4	98996	OLYMPIC FASTENING SYSTEMS INC

Techincal Specification:

EXPANSION DEVICE	DRIVE STEM-TYPE H
FASTENER LENGTH	0.271 INCHES MINIMUM AND 0.311 INCHES MAXIMUM
GRIP LENGTH	0.110 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
HEAD HEIGHT	0.107 INCHES MINIMUM AND 0.117 INCHES MAXIMUM
HEAD MAJOR DIAMETER	0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM
HEAT TREATMENT	T-4 SOLUTION HEAT TREATED OVERALL
HEAD STYLE	UNIVERSAL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES STEM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-430 FED SPEC ALL MATERIAL RESPONSES SLEEVE
MATERIAL	ALUMINUM ALLOY 2117 OR ALUMINUM ALLOY 5056 SLEEVE
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 STEM
SHANK DIAMETER	0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SHANK STYLE	DRIVE PIN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE SLEEVE
SURFACE TREATMENT	ANODIZE OR CHROMATE SLEEVE

Click here to Register for Free 30-day Trial