|
|
|
National Stock Number:
5320-00-761-3134
Federal Supply Class:
5320
National Item Identification Number:
007613134
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| CR9116-3-4 | 11815 | SPS TECHNOLOGIES, LLC | | MS20605AD3W4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20605AD3W4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.328 INCHES MAXIMUM | | GRIP LENGTH | 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.179 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 2117 OVERALL | | SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | SHANK STYLE | PULL THROUGH HOLLOW SHANK | | SHEAR STRENGTH | 70 SINGLE POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OR OXIDE FILM OVERALL |
|
|