|
|
|
National Stock Number:
5320-00-760-8917
Federal Supply Class:
5320
National Item Identification Number:
007608917
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 5320PL1563645 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | HL21PB-8-6 | 73197 | HI-SHEAR CORPORATION | | HL21PB-8-6 | R1120 | SATAIR A/S | | HL21PB8-6 | 06725 | SPS TECHNOLOGIES, LLC | | HL21PB8-6 | 17446 | HUCK INTERNATIONAL, INC | | HL21PB8-6 | 56878 | SPS TECHNOLOGIES, LLC | | HL21PB8-6 | 60516 | WEST COAST AEROSPACE, INC. | | HL21PB8-6 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL21PB8-6 | 97928 | HUCK INTL INC | | HL553-8-6 | 17446 | HUCK INTERNATIONAL, INC | | HL553-8-6 | 27624 | SPS TECHNOLOGIES LLC | | HL553-8-6 | 56878 | SPS TECHNOLOGIES, LLC | | HL553-8-6 | 73197 | HI-SHEAR CORPORATION | | HL553-8-6 | 80539 | SPS TECHNOLOGIES, LLC | | HL553-8-6 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM | | GRIP LENGTH | 0.380 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | WIDTH BETWEEN FLATS | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF |
|
|