| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 0.672 INCHES MINIMUM AND 0.702 INCHES MAXIMUM |
| GRIP LENGTH | 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD MAJOR DIAMETER | 0.635 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 NUT |
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8740 BOLT |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 304 SLEEVE |
| SHANK DIAMETER | 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| SHEAR STRENGTH | 10350 DOUBLE POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE BOLT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE NUT |
| SURFACE TREATMENT | PASSIVATE OR CADMIUM SLEEVE |