5310-00-145-1859 WASHER,FLAT Index 5307-00-145-1865 STUD,PLAIN

National Stock Number:
5320-00-145-1864

Federal Supply Class:
5320

National Item Identification Number:
001451864

Description:
RIVET,BLIND

Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.


Manufacturer Information:
CR2262-5-511815SPS TECHNOLOGIES, LLC
CR2262-5-592215HOWMET GLOBAL FASTENING SYSTEMS INC
CR2262-5-5C4293ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH
CR2262-5-5F7652KLX AEROSPACE SOLUTIONS II SAS
CR2262-5-5FB009KLX INC
NAS1399B5-580205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICESERRATED STEM-TYPE W
FASTENER LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
GRIP LENGTH0.251 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAT TREATMENTH-38 STRAIN HARDENED LOCKING RING
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE LOCKING RING
MATERIALALUMINUM ALLOY 5056 LOCKING RING
SHANK DIAMETER0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
SHANK STYLESELF-PLUGGING MECHANICALLY LOCKED STEM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE STEM
SURFACE TREATMENTANODIZE SLEEVE
SURFACE TREATMENTCHROMATE STEM


Click here to Register for Free 30-day Trial